PLA 90 filament from Orbi-Tech with a diameter of 1.75 mm and natural colour. This is a tough filament that is less brittle than normal PLA and bendable like ABS. PLA 90 has nearly no warpage or shrinkage.
Material: Polyactide / Polylactic acid (PLA)
Weight (without spool): 750 g
Diameter: 1.75 mm
Spool size: 20 x 20 x 5,5 cm
Tips and Tricks:
- It is recommended to print PLA 90 with temperature rates around 210-230°C.
- The softening temperature for PLA 90 is a little bit higher than 90°C.